OXYCHECK PRESSURE VALVES
OXYCHECK oxygen system components are made entirely from materials that are non-flammable in oxygen at pressures equal to or greater than the maximum allowable working pressure. This essentially removes the Fuel Leg of the Fire Triangle and greatly reduces both the risk of a fire occurring and the consequences of an unanticipated ignition. This rigorous engineering process results in oxygen system components with an unprecedented level of fire safety.
Aviation (Civilian and Defense)
- • Emergency
- • Crew support
- • Ground support equipment
- • Removable/in-place systems
Medical/Life Support
- • Hospital systems
- • SCUBA/charge systems
- • Hyperbaric applications
- • Home health care systems
- • Emergency medical systems and services
- • Valve Integrated Pressure Regulator (VIPR)
- • Valve Integrated Valve Regulator (IVR)
Industrial
- • High/low pressure systems
- • Mining/energy/petrochemical systems
- • Reticulation systems with/without manifolds
- • Oxygen compressor valves (tailored to compressor)
- • Replace/retrofit in-line check valves and pressure relief valves
OC-001 High Pressure Oxygen Fill Valve (HPOFV)
- • Optional dust cap and chain for inlet fitting
- • Valve body lock-wired to housing
- • Custom external housing styles and
- • mounting points available
OC-003 Oxygen In-Line Check Valve
- • Wide range of end fittings available: Male / Female, NPT, BSP, Metric, etc
- • Easily retrofitted to existing systems
- • Brass or Monel™ Housing
- • MAWP: 3000–10,000 psia, 21–69 MPa, 210–690 bar
OC-004 Oxygen Compressor Check Valve
- • Interchangeable with current compressor check valves and easily retrofitted to existing systems
- • MAWP:
- • Up to 10,000 psia / 69 MPa / 690 bar
- • Brass or Monel™ housing
- • Reduce compressor operating costs through improved mechanical efficiency and performance
OC-005 Valve Integrated Pressure Regulator (VIPR) and Integrated Valve Regulator (IVR) Fill Valve
- • Non-flammable fill valve for increased safety when integrated into VIPR/IVR
- • Improved performance with lower leak rates
- • Optional sintered bronze filter (nominal 7 micron filtration)
- • Interfaces with standard VIPR/IVR fill connector
- • Meets standards: ISO 10524-3 (Europe) and CGA E-18 (USA)
- • Fill valve external geometry, threaded interface and filtration (if required) customized to meet the requirements of VIPR/IVR manufacturers or distributors
OC-006 Oxygen Pressure Relief Valve
- • Repeatable and reliable performance
- • Relief valve set, sealed, validated and supplied with a certificate of conformance
OF-001 Oxygen Fill Valve Hose Adaptor
- • Freely-rotating connection ensures that the internal port connector does not rotate relative to the sealing surface on the oxygen fill valve inlet fitting during connection – preventing damage to the sealing surfaces
- • Large brass heat sink to dissipate thermal energy generated in the event of adiabatic compression of the gas in the fill hose
- • Custom sizes and end fittings available
- • Re-usable brass plug and thread cap available to protect the fitting when it is not in use
OF-003 Flow Restrictor for Oxygen Systems
- • 1mm-diameter flow restrictor channel to prevent rapid pressurization
- • Metallic housing acts as heat sink
- • Non-flammable materials, including sintered bronze filter element
